Accessory Drive System (03.05)
Installation
1. Install idler to engine (bolt x1) (torque).
2. Release tensioner and slip belt on idler.
3. Install throttle body duct.
4. Connect breather pipe quickfits (x2) to air cleaner duct.
Engine Drive Belt Idle Assembly-Renew
Repair Operation Time (ROT)
Item
Engine Drive Belt Idle Assembly-Renew
Removal
1. Remove throttle body duct for access. (clips x3).
2. Disconnect breather pipe quickfits (x2) from air cleaner
duct.
3. Release tensioner and slip belt from idler.
4. Remove idler from engine (bolt x1).
Installation
1. Install idler to engine (bolt x1) (torque).
2. Release tensioner and slip belt on idler.
3. Install throttle body duct.
4. Connect breather pipe quickfits (x2) to air cleaner duct.
3-6-2
Code
03.05.BG
Workshop Manual
October 2005