Transmission Cooling (07.02)
Transmission (07.00)
Transmission (07.00)
Transmission Cooling (07.02)
Specifications
Torque Figures
Description
Cooler to subframe
Maintenance
Oil Cooler Matrix-Renew
Repair Operation Time (ROT)
Item
Oil Cooler Matrix-Renew
Removal
1. Raise vehicle on ramp.
2. Remove rear exhaust silencer heatshield (see Workshop
Manual procedure 02.06.AG Heatshield - Exhaust
Muffler - Renew).
3. Position drain container to collect oil spillage.
7-1-2
4. Loosen oil cooler pipe unions (x2) (see Fig. 1).
Nm.
lb. / ft.
8-10
6-7.5
Code
07.02.FC
5. Remove nuts (x4) from oil cooler to rear bumper
armature.
Workshop Manual
Fig.
October 2005