Aston Martin V8 Vantage Workshop Manual page 26

3. Remove screws (x4) that secure centre stack assembly to
IP (see Fig. 1).
4. Release centre stack assembly and disconnect
multiplugs (x12).
Installation
1. Position centre stack assembly and install multiplugs
(x12).
2. Install and torque tighten screws (x4).
3. Install bezel assembly instrument panel (see Workshop
Manual procedure 01.12.AV Bezel Assembly -
Instrument Panel - Renew).
4. Install panel assembly - console (see Workshop Manual
procedure 01.12.DB Panel Assembly Console - Renew).
October 2005
Fig. 1
Workshop Manual
Interior Trim (01.05)
Body System (01.00)
1-4-7