Aston Martin V8 Vantage Workshop Manual page 314

2. Depress clips and remove rear fog switch from centre
stack.
Installation
1. Install rear fog light switch and secure with clips.
2. Install centre stack assembly (see Workshop Manual
procedure 15.01.CF Centre Stack Assembly - Remove
for Access and Refit).
Hazard Warning Switch-Renew
Repair Operation Time (ROT)
Item
Hazard Warning Switch-Renew
Removal
1. Remove centre stack assembly (see Workshop Manual
procedure 15.01.CF Centre Stack Assembly - Remove
for Access and Refit).
2. Depress clips and remove hazard warning switch from
centre stack.
Installation
1. Install hazard warning switch and secure with clips.
2. Install centre stack assembly (see Workshop Manual
procedure 15.01.CF Centre Stack Assembly - Remove
for Access and Refit).
Multi Media Module-Renew
Repair Operation Time (ROT)
Item
Multimedia Module-Renew
Removal
1. Disconnect vehicle battery.
2. Remove LH rear pillar upper panel assembly (see
Workshop Manual procedure 01.05.BG Panel Assembly
- Rear Pillar - Upper - LH - Renew).
3. Release boot carpet LH side rear (see Workshop Manual
procedure 01.05.FM Carpet Assembly - Side Front - LH
- Renew).
4. Remove bolts (x3) securing multi media module to
body.
5. Remove module and disconnect multiplugs (x3).
6. Remove screws (x4) bracket to multi media module.
Installation
1. Install backed to module.
2. Connect multiplugs (x3) module.
3. Install module.
4. Install LH rear pillar upper panel assembly (see
Workshop Manual procedure 01.05.BG Panel Assembly
- Rear Pillar - Upper - LH - Renew).
5. Install boot carpet (see Workshop Manual procedure
01.05.FM Carpet Assembly - Side Front - LH - Renew).
6. Connect vehicle battery.
15-1-6
Code
15.01.CL
Code
19.07.BB
Workshop Manual October 2005