Units Names And The Functions; Fcr Prima T2 (Cr-Ir 392) Main Unit - FujiFilm FCR PRIMA T2 Operation Manual

2.2 Units Names and the Functions

Described below are units component of the FCR PRIMA T2 (CR-IR 392) main unit and the Operation
Panel.

2.2.1 FCR PRIMA T2 (CR-IR 392) Main Unit

2
Left-side
cover
Operation Panel
Cassette Set Unit
Main Power Switch
Power Inlet
External Device Connector
(I/F Cable)
Scanner Cleaning Handle
CAUTION
● Do not connect telephone lines to LAN connector.
Only the IEC 60950-1/EN 60950-1 standard non-shielded cables are appropriate for
connection to this connector.
● Plug the power cord firmly into the power inlet.
● When plugging/unplugging the power cord, hold its connector to avoid excessive force to
the cord.
2-2
FCR PRIMA T2 Operation Manual
Front cover
Name
Operation panel for the FCR PRIMA T2 (CR-IR 392).
Used for inserting cassette that contains an exposed IP.
Leave it turned ON.
ON ( I ):
OFF ( O ): Main Power OFF
Power inlet for this equipment.
Used for network-connecting the external device.
Used for cleaning the Scanner.
897N102546
Right-side
cover
Function
Main Power ON
Rear cover