Unit Names And The Functions - FujiFilm FDR ES DR-ID1270 Operation Manual

2.2 Unit Names and the Functions

Unit names and the functions of the DR-ID1270 are described below.
* Exposure plane is shown in this figure.
Name
Flat panel sensor
Battery pack level indicator
Name
Status lamp
READY
POWER
ERROR
LINK
HINT
For details on the battery pack level indicator, see "3.1.8 Lamp Indications on the Flat Panel Sensor".
Applied part
Battery pack
level indicator
<Front>
Flat panel sensor
The DR-ID1271SE and DR-ID1272SE incorporate a GOS indirect panel.
The DR-ID1273SE, DR-ID1274SE and DR-ID1275SE incorporate a CsI indirect
panel.
Indicates the equipment status by LEDs.
READY (Green)
POWER (Blue)
(The power on/off state of the
flat panel sensor is displayed.).
ERROR (Orange)
LINK (White)
* When the battery pack is not attached, all LEDs are off.
Status lamp
<Back>
Description
Description
On Exposure possible
Blinks for 1.0
During exposure sequence
second
Off Not ready
On Power ON
Off Power OFF
Blinks for 1.0
Error occurred
second
Off Normal
On Connected
Off Communication not possible.
DR-ID1270 Operation Manual
2
2-3
897N120821E