Safety; Hazardous Materials; It Network; Functions - FujiFilm SonoSite SII User Manual

Safety

Hazardous materials

WARNING Products and accessories may contain hazardous materials. Ensure that products
and accessories are disposed of in an environmentally responsible manner and
meet federal and local regulations for disposing of hazardous materials.

IT Network

Functions

This device can be connected to an IT network to perform the following functions:
Storing the examination data (static images, clips) acquired by this device in Picture Archiving and
Communication System (PACS) by DICOM communication.
Querying examination orders from the Modality Worklist (MWL) server by DICOM communication and
start them.
Upload images to the PDAS or SiteLink Image Manager.
Setting the time of this device by inquiring the network time service.
Communicating procedure status via the Modality Performed Procedure Step (MPPS) service.
Requesting transfer of responsibility for image ownership to another system via the Storage Commitment
service.

Network for connecting the device

To ensure safety, use an IT network that is isolated from the external environment by a firewall.

Specifications for the connection

Hardware specification
802.11 b/g/n
Ethernet 100BASE-TX/10BASE-T using RJ45 port with patch cable
Software specifications
This device is connected to PACS and MWL by DICOM standard. Refer to the DICOM Conformance
Statement of this device for details.
When available, this device connects to the network time server at startup.
Hazardous materials 11