Snmp Agent; Snmpv1/V2C-Community; Snmp Trap - WAGO 852-1328 Product Manual

Industrial managed 6 ports 1000base-t; 2 slots 1000base-sx/lx; mac security

Hide thumbs Also See for 852-1328:

Table of Contents

852-1328

Configuration in the WBM

The "SNMP community" acts like a password and is used to define the security parame-

ters of SNMP clients in an SNMP v1 and SNMP v2c environments. The default "SNMP

community" is "public" for both SNMPv1 and SNMPv2c before SNMPv3 is enabled. Once

SNMPv3 is enabled, the "Communities" of SNMPv1 and v2c have to be unique and can-

not be shared.

WAGO's industrial managed switch support SNMP and can be configured in this tab

page as shown in Figure "WBM "Diagnostics" Page – "SNMP" Tab". The SNMP setting

has four parts, which are:

• SNMP Agent

• SNMPv1/v2c Community

• SNMP-Trap

• SNMPv3 Authentication (Auth.)

Note that SNMP V1/V2c Community setting was not shown in Figure "WBM "Diagnostics"

Page – "SNMP" Tab" but it will be shown when SNMP V1/V2c version option was se-

lected.

Note

Using SNMPv3

For security reasons, the user cannot use SNMP v1/v2c to reboot the device, change se-

curity related settings, and change the device's password. These changes are possible

only by using SNMPv3.

Product manual | Version: 1.2.0

Industrial Managed Switch

Table of Contents

Table of Contents