Introduction; Compliance With Emc And Low Voltage Directives - Mitsubishi Electric MELSEC-Q Series User Manual

Thank you for purchasing the Mitsubishi Electric MELSEC-Q series programmable controllers.
This manual describes the operating procedure, system configuration, installation, wiring, settings, functions,
programming, and troubleshooting of the QJ61BT11N CC-Link system master/local module (hereafter abbreviated as
master/local module).
Before using this product, please read this manual carefully and develop familiarity with the functions and performance
of the MELSEC-Q series programmable controller to handle the product correctly.
When applying the program examples introduced in this manual to an actual system, ensure the applicability and
confirm that it will not cause system control problems.
Please make sure that the end users read this manual.
Remark
Operating procedures are explained using GX Works2. When using GX Developer, refer to Page 401, Appendix 7.
COMPLIANCE WITH EMC AND LOW VOLTAGE
(1) Method of ensuring compliance
To ensure that Mitsubishi Electric programmable controllers maintain EMC and Low Voltage Directives when
incorporated into other machinery or equipment, certain measures may be necessary. Please refer to one of the
following manuals.
• QCPU User
• Safety Guidelines (This manual is included with the CPU module or base unit.)
The CE mark on the side of the programmable controller indicates compliance with EMC and Low Voltage
Directives.
(2) Additional measures
To ensure that this product maintains EMC and Low Voltage Directives, please refer to one of the manuals listed
under (1).
6

INTRODUCTION

DIRECTIVES
'
s Manual (Hardware Design, Maintenance and Inspection)