CHAPTER 5
5.1
CC-Link System Configuration
A CC-Link system is configured with a master station, remote I/O station, remote device station, intelligent device
station, and local station.
Terminating resistor
The CC-Link version and the number of slave stations that can be connected vary depending on the mode of the
master/local module. (
Master/local modules of other series can be also used in a CC-Link system.
SYSTEM CONFIGURATION
Master station
Terminating resistor
Page 27, Section 3.2.1, Page 43, Section 3.6.2)
CHAPTER 5 SYSTEM CONFIGURATION
Remote I/O station
Remote device station
Local station
Intelligent device station
5
69