Mitsubishi Electric MELSEC-Q Series User Manual page 110

(3) Remote Device Station Initial Setting
Register the initial settings using a programming tool, and reflect them to a remote device station using Remote
device station initialization procedure registration instruction (SB000D).
Project window
button
1.
To "Target Station No.", set the station number of the remote device station where the initial
settings are configured.
Set the start station number instead if the number of occupied stations is two or more.
2.
Click the
3.
Register the procedure for the initial settings in the "Remote Device Station Initial Setting
Procedure Registration" window.
4.
Click the
• "Remote Device Station Initial Setting Target Station Number Setting" window
Item
Set the station number of the station where the initial settings are
Target Station No.
configured.
No. of Registered
The number of the procedures registered using the
Procedures
button is displayed.
"Remote Device Station Initial Setting Procedure Registration" is
displayed by clicking it.
• "Remote Device Station Initial Setting Procedure Registration" window
Item
Input Format Select the input format of "Write Data".
108
[Parameter] [Network Parameter]
button.
button and close the setting window.
Description
Description
[CC-Link]
Setting range
1 to 64 (Default: Blank)
–
–
Setting range
• DEC
• HEX
(Default: DEC)