Mitsubishi Electric MELSEC-Q Series User Manual page 318

4.
Set "Time of Logging Acquisition".
Enter the period during which logging is executed.
When 0 seconds is set, logging will be continued until the
logs reaches to 5000.
5.
Select either "RAM" or "RAM + Flash ROM" in "Log Storage Area in CC-Link Module".
• When GX Works is not connected at all times
Select "RAM + Flash ROM". To check the logs stored on the flash ROM (maximum: 45 logs), connect GX
Works2.
• When GX Works2 is always connected
Up to 5000 logs can be stored regardless of the selected option ("RAM" or "RAM + Flash ROM").
6.
Click the
Logging will be executed for the specified period.
However, if the
stop.
7.
When an item is selected under "Log List", the status of the selected item is displayed in the log
display part.
Select an item.
316
button.
button is clicked, or the number of logs reaches to 5000, the logging will
Displays the status of the selected item.
button is clicked or the number of