Mitsubishi Electric MELSEC-Q Series User Manual page 255

AJ65VBTCU-68DAVN: Initial setting change
AJ65VBTCU-68DAVN: Process of completing the initial setting
AJ65VBTCU-68ADVN: Digital output value reading
AJ65VBTCU-68ADVN: Process at error occurrence
AJ65VBTCU-68DAVN: Digital value setting
AJ65VBTCU-68DAVN: Analog output enable/disable setting
AJ65VBTCU-68DAVN: Process at error occurrence
The program is needed only for the initial setting change.
1
2.
Write the program to the CPU module in the master station. Then reset the CPU module or power
off and on the system.
[Online] [Write to PLC]
or power off
CHAPTER 10 PROGRAMMING
Analog output enable/disable
setting (RWw8)
CH.1 to 4 output range setting
(RWw9)
Turn on Initial data setting
request flag (RY19).
Turn off Initial data processing
complete flag (RY18).
Turn off Initial data setting
request flag (RY19).
Read CH.1 digital output value
(RWr0).
Read CH.2 digital output value
(RWr1).
Read Error code (RWr8).
Turn on Error reset request
flag (RY1A).
Turn off Error reset request
flag (RY1A).
Set CH.1 digital value setting
(RWw0).
Set CH.2 digital value setting
(RWw1).
Turn on CH.1 analog output
enable/disable flag (RY00).
Turn on CH.2 analog output
enable/disable flag (RY01).
Read CH.1 check code (RWr0)
and CH.2 check code (RWr1).
Read Error code (RWr8).
Turn on Error reset request
flag (RY1A).
Turn off Error reset request
flag (RY1A).
on
10
253