Appendix 7 When Using Gx Developer; Appendix 7.1 Parameter Settings; Appendix 7.2 Device Test - Mitsubishi Electric MELSEC-Q Series User Manual

Appendix 7
This appendix describes the operations of GX Developer, which are different from those of GX Works2. When GX
Developer is used, read this appendix before operation.
The operations that are not described in this appendix are the same as those of GX Works2.
Appendix 7.1
GX Developer does not have the station information setting on the CC-Link configuration window. Set the station
information on the "CC-Link Station Information" window. (
Appendix 7.2
Execute a device test on the following menu.
[Online]
When using GX Developer
Parameter settings
Device test
[Monitor] [Device batch monitor]
Page 106, Section 7.3.2 (2) (b))
APPENDICES
A
401