Checking The Status Of Data Link - Mitsubishi Electric MELSEC-Q Series User Manual

Cc-link system master/local module

Hide thumbs Also See for MELSEC-Q Series:

Table of Contents

Checking the status of data link

Power on the local station, then master station to start data link.

When the LEDs are in the following states, data link is being performed normally.

(1) LEDs on the master station

The LEDs may look dimly lit or off depending on the communication status.

(2) LEDs on the local station

The LEDs may look dimly lit or off depending on the communication status.

Show Quick Links

Table of Contents