Stopping And Restarting Data Link - Mitsubishi Electric MELSEC-Q Series User Manual

11.4.5

Stopping and restarting data link

How to stop and restart data link of a master/local module is described below.
During a debugging session, the master/local module does not receive data from other stations and does not send
data of the host station.
1.
Open the "CC-Link Diagnostics" window.
[Diagnostics]
2.
Select a master/local module where data link is to be stopped and restarted on the top of the
window.
3.
Double-click "Stop Data Link" on the bottom of the window.
The data link of the master/local module stops.
If "Stop Data Link" is not displayed on the bottom of the window, click the
bottom left corner of the window.
4.
When the step 3. is performed while the data link of the selected module has been stopped, the
data link will restart.
When stopping or restarting data link, do not write data to the buffer memory area (buffer memory address: 5E0
320
[CC-Link/Diagnostics]
Select the applicable module.
Double-click the icon.
button on the
).
H