7.4
Parameter Settings for a Local Station and Standby
Master Station
This section describes the parameter settings when a master/local module is used as a local station or standby master
station.
7.4.1
Setting method
1.
Open the "Network Parameter" window from a programming tool.
Project window
2.
Input settings to the "Network Parameter" window. (
3.
Click the
4.
Write the settings to the CPU module using the programming tool.
[Online]
5.
The settings are reflected by resetting the CPU module or powering off and on the system. When
the reflection is completed, data link is automatically started at master/local modules.
● When change the settings for a local station or standby master station, change the settings for the master station
accordingly.
114
[Parameter]
[Network Parameter]
button.
[Write to PLC]
[CC-Link]
Page 115, Section 7.4.2)