Setting And Canceling A Temporary Error Invalid Station - Mitsubishi Electric MELSEC-Q Series User Manual

11.4.6

Setting and canceling a temporary error invalid station

Even if a data link error occurs in a slave station, the station is not detected as a faulty station in the master station and
local station. This setting can be configured even during data link, unlike the error invalid station setting function.
This function is used to exchange slave stations during data link for maintenance or for other purposes.
1.
Open the "CC-Link Diagnostics" window.
[Diagnostics]
2.
Right-click the target slave station icon of the temporary error invalid station setting and select
"Set/Cancel Temporary Error Invalid Station".
The selected station will be a temporary error invalid station.
3.
When the step 2. is performed while the selected station has been set as a temporary error invalid
station, the temporary error invalid station setting is canceled.
When configuring the temporary error invalid station setting, do not write data to the buffer memory areas (buffer memory
addresses: 5E0
[CC-Link Diagnostics]
and 603 to 607 ).
H H H
CHAPTER 11 TROUBLESHOOTING
321
11