G(P).Rito - Mitsubishi Electric MELSEC-Q Series User Manual

9.7

G(P).RITO

The G(P).RITO instruction writes data to the automatic update buffer of the target station.
The instruction is available for modules that have the automatic update buffer (e.g. AJ65BT-R2(N)).
[Instruction [Execution
symbol] condition]
G.RITO
GP.RITO
Setting Internal device
data (System, user)
Bit Word
n1
n2

(D)
n3
(1) Setting data
Device
Start I/O number of the module (First two digits of I/O number written
Un
with three digits)
The station number of the intelligent device station
n1
Random access buffer specification
The offset value of the automatic update buffer of the intelligent device
n2 station specified by the master station, or the offset value of the random
access buffer
(D) Start number of the device to which data to be written is stored
n3 Number of write points
*1 The value that was set in the station information setting of the network parameter of a programming tool
*2 No process is performed when "0" is set.
Command
G.RITO
Command
GP.RITO
Applicable device
Link direct
device
File
J\
register
Bit Word
Description
CHAPTER 9 DEDICATED INSTRUCTIONS
Un n1 n2
Un n1 n2
Intelligent
function module Index
device register Z
U\G




Setting range
0 to FE
1 to 64
FF
H
Between 0 and parameter
setting value
Within the range of the
specified device
0 to 4096
(D) n3
(D) n3
Constant
Others
K, H $
 
 
  
 
Data type
H
16-bit binary
*1
Device
*2
16-bit binary
201
9