Mitsubishi Electric MELSEC-Q Series User Manual page 360

Number Name
SW0094
(694 )
H
SW0095
Other stations
(695 )
H
transient
transmission
SW0096
status
(696 )
H
SW0097
(697 )
H
SW0098
(698 )
H
SW0099
(699 )
H
Station number
overlap status
SW009A
(69A )
H
SW009B
(69B )
H
358
Whether a transient transmission error has occurred in other stations is
stored.
0: No transient transmission error
1: Transient transmission error
b15 b14 b13
SW0094 16 15 14
SW0095 32 31 30
SW0096 48 47 46
SW0097 64 63 62
1 to 64 in the table indicate station numbers.
Only the bit corresponding to the start station number turns on.
Reserved stations, station with the last station number, and stations later
than that are excepted.
Even when the transient transmission is retried using a dedicated
instruction, the error will be detected.
Whether station numbers are unique when the start station numbers of
modules are different is stored.
0: Normal
1: Station number in use (start station number only)
b15 b14 b13
SW0098 16 15 14
SW0099 32 31 30
SW009A 48 47 46
SW009B 64 63 62
1 to 64 in the table indicate station numbers.
• Reserved stations, station with the last station number, and stations
later than that are excepted.
• Only the bit corresponding to the start station number turns on. This
item is checked, and the result is stored only upon data link start and
the update of a parameter.
• For a slave station with the transmission speed auto-tracking setting,
whether the station number is already used for other stations may not
be detected.
• When the station number of a station is the same as that of the
standby master station, the status cannot be detected.
Description
b12 to b3 b2 b1
13 to 4 3
29 to 20 19 18
45 to 36 35 34
61 to 52 51 50
b12 to b3 b2 b1
13 to 4 3
29 to 20 19 18
45 to 36 35 34
61 to 52 51 50
Availability
( : Yes, ×: No)
Online
Master
station station
b0
2 1
17
33
49
b0
2 1
17
33
49
Offline
Local
×
× ×