Appendix 8.2 Network Parameter Setting Sheet - Mitsubishi Electric MELSEC-Q Series User Manual

Appendix 8.2
Item
Start I/O No.
Data Link Faulty Station
Setting
Case of CPU STOP Setting
Operation Block Data Assurance per
Setting Station
Number of Occupied
Stations
Expanded Cyclic Setting
Type
Mode
Total Module Connected
Remote Input (RX)
refresh device
Remote Output (RY)
refresh device
Remote Register (RWr)
refresh device
Remote Register (RWw)
refresh device
Ver.2 Remote Input (RX)
refresh device
Ver.2 Remote Output (RY)
refresh device
Ver.2 Remote Register (RWr)
refresh device
Ver.2 Remote Register (RWw)
refresh device
Special Relay(SB)
refresh device
Special Register(SW)
refresh device
Network parameter setting sheet
Setting range
0000 to 0FE0
Hold or clear the input data.
Default: Clear input data
Refresh or clear compulsorily.
Default: Refresh
Disable or enable the setting.
Default: Disable the setting
1 to 4 stations occupied
Default: Occupied Station 1
Single, Double, Quadruple, Octuple
Default: Single
Master Station
Master Station (Duplex Function)
Master station (Extension Base)
Local Station
Standby Master Station
Default: Master Station
Remote Net (Ver.1 Mode)
Remote Net (Ver.2 Mode)
Remote Net (Additional Mode)
Remote I/O Net Mode
Offline
Default: Remote Net (Ver.1 Mode)
1 to 64
Default: 64
Device name:
Select one from X, M, L, B, D, W, R, and ZR.
Device name:
Select one from Y, M, L, B, T, C, ST, D, W, R, and
ZR.
Device name:
Select one from M, L, B, D, W, R, and ZR.
Device name:
Select one from M, L, B, T, C, ST, D, W, R, and
ZR.
Device name:
Select one from X, M, L, B, D, W, R, and ZR.
Device name:
Select one from Y, M, L, B, T, C, ST, D, W, R, and
ZR.
Device name:
Select one from M, L, B, D, W, R, and ZR.
Device name:
Select one from M, L, B, T, C, ST, D, W, R, and
ZR.
Device name:
Select one from M, L, B, D, W, R, SB, and ZR.
Device name:
Select one from M, L, B, D, W, R, SW, and ZR.
APPENDICES
Setting value
Hold/Clear
Refresh/Clear compulsorily
Disable/Enable
Master Station
Master Station (Duplex Function)
Master station (Extension Base)
Local Station
Standby Master Station
Remote Net (Ver.1 Mode)
Remote Net (Ver.2 Mode)
Remote Net (Additional Mode)
Remote I/O Net Mode
Offline
409
A