Setting Of The Data Link Status Upon An Error In The Programmable Controller Cpu Of The Master Station - Mitsubishi Electric MELSEC-Q Series User Manual

8.2.2
Setting of the data link status upon an error in the
programmable controller CPU of the master station
If a stop error occurs in the CPU module of the master station, whether to stop or continue data link can be selected.
( Page 121, Section 7.5)
When a standby master station is set, the standby master station starts to take in control without data link of the master
station continued even if the setting of the data link status is set to "Continue". (Use of the standby master function is
prioritized.)
(1) Setting method
Select whether to stop or continue data link in "PLC Down Select" of the network parameter. (
Section 7.3.2)
130
Page 97,