Mitsubishi Electric MELSEC-Q Series User Manual page 162

(b) Refresh device setting
• QCPU (excluding a Basic model QCPU)
• Basic model QCPU
Basic model QCPU side
(c) Specification of a buffer memory size for an intelligent device station in the station
information setting
Send buffer
Receive buffer
Automatic update buffer
(2) Default parameter settings when CC-Link is automatically started up with a
master/local module operating as a local station
When a master/local module is started up with the station numbers 1 to 64, it is started up as a local station.
The table below lists the parameter settings of when CC-Link is automatically started up by a master/local module
operating as a local station.
Operation Setting
Mode
Refresh devices
(a) Operation Setting
Data Link Faulty Station Setting
Case of CPU STOP Setting
Number of Occupied Stations
Block Data Assurance per Station
160
CPU module side
X1000 to X17FF
Y1000 to Y17FF
W1E00 to W1EFF
W1F00 to W1FFF
SB0600 to SB07FF
SW0600 to SW07FF
X400 to X7FF
Y400 to Y7FF
W600 to W67F
W70 to W77F
SB0200 to SB03FF
SW0200 to SW03FF
Item
Item
Item
Direction




↔
↔
Direction




↔
↔
Setting details
64 words
64 words
128 words
Setting details
Refer to Page 160, Section 8.3.3 (2) (a).
Remote Net (Ver.1 Mode)
Refer to Page 160, Section 8.3.3 (1) (b).
Setting details
Clear the input data.
Refresh.
Occupied Station 1
Disable the setting.
Master station/local station side
RX0 to RX7FF
RY0 to RY7FF
RWr0 to RWrFF
RWw0 to RWwFF
SB0000 to SB01FF
SW0000 to SW01FF
Master station/local station side
RX0 to RX3FF
RY0 to RY3FF
RWr0 to RWr7F
RWw0 to RWw7F
SB0000 to SB01FF
SW0000 to SW01FF