Introduction - Mitsubishi Electric MELSEC iQ-F Series Manual

INTRODUCTION

Thank you for purchasing the Mitsubishi MELSEC iQ-F series programmable controllers.
This manual describes the module function blocks for the relevant products listed below.
Please read this manual and the relevant manuals and fully understand the specifications before attempting to use the
module function blocks.
Please make sure that the end users read this manual.
Relevant products
• FX5-2HC/ES
Regarding use of this product
• This product has been manufactured as a general-purpose part for general industries, and has not been designed or
manufactured to be incorporated in a device or system used in purposes related to human life.
• Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger
movement vehicles, consult Mitsubishi Electric.
• This product has been manufactured under strict quality control. However when installing the product where major
accidents or losses could occur if the product fails, install appropriate backup or failsafe functions into the system.
Note
• If in doubt at any stage during the installation of the product, always consult a professional electrical engineer who is
qualified and trained in the local and national standards. If in doubt about the operation or use, please consult your local
Mitsubishi Electric representative.
• Mitsubishi Electric will not accept responsibility for actual use of the product based on these illustrative examples. Please
use it after confirming the function and safety of the equipment and system.
• The content, specification etc. of this manual may be changed, for improvement, without notice.
• The information in this manual has been carefully checked and is believed to be accurate; however, if you notice a doubtful
point, an error, etc., please contact your local Mitsubishi Electric representative.
2