Remote I/O Station Points Setting (Remote Net Ver.2 Mode Only) - Mitsubishi Electric MELSEC-Q Series User Manual

Cc-link system master/local module
Hide thumbs Also See for MELSEC-Q Series:
Table of Contents

Advertisement

8.3.9
Remote I/O station points setting (remote net Ver.2 mode
only)
When the master station is in the remote net Ver.2 mode, the number of refresh points with a remote I/O station can be
selected from 8 points, 16 points, and 32 points. Changing the number of points can save the areas of the refresh
devices in a CPU module. (In modes other than the remote net Ver.2 mode, only 32 points per station can be
selected.)
The remote I/O station points setting is
configured.
CPU module
Master station
Remote output (RY)
Station
number 2
Station number 3
Y
The remote I/O station points setting is not
configured.
CPU module
Master station
Remote output (RY)
Y
170
Remote I/O station
(Station No.1, the
number of occupied
stations: 1)
Station
Y07 to Y00
number 1
Station
number 4
to
8-point output module
Remote I/O station
(Station No.1, the
number of occupied
stations: 1)
Y07 to Y00
Station
number 1
Station
number 2
Station
number 3
Station
number 4
8-point output module
Remote I/O station
Remote I/O station
(Station No.2, the
(Station No.3, the
number of occupied
number of occupied
stations: 1)
stations: 1)
Y07 to Y00
Y0F to Y00
8-point output module
16-point output module
Remote I/O station
Remote I/O station
(Station No.2, the
(Station No.3, the
number of occupied
number of occupied
stations: 1)
stations: 1)
Y07 to Y00
Y0F to Y00
8-point output module
16-point output module
Remote I/O station
(Station No.4, the
number of occupied
stations: 1)
Y0F to Y00
Y1F to Y10
32-point output module
Remote I/O station
(Station No.4, the
number of occupied
stations: 1)
Y0F to Y00
Y1F to Y10
32-point output module

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents