Mitsubishi Electric MELSEC-Q Series User Manual page 216

2.
Open the "I/O Assignment" tab of "PLC Parameter", and configure the settings as follows.
Project window
3.
Open the "Switch Setting for I/O and Intelligent Function Module" window by clicking the
Click the
Switch
Switch1
Switch2
Switch3
Switch4
Switch5
*1 It can be set for the master/local module with a serial number (first five digits) of 09112 or later.
*2 It can be set for the master/local module with a serial number (first five digits) of 17012 or later.
214
[Parameter]
button and configure the settings as follows.
button.
Blank
Blank
Set the mode for a master/local module. (Mode setting)
• Remote net Ver.1 mode: 0000
• Remote net Ver.2 mode: 0200
• Remote net additional mode: 0100
Set the "Case of CPU STOP Setting"
master/local module.
• When "Auto Detect Setting of the Connected Device" is 0 and "Case of CPU STOP Setting" is 0: 0100
• When "Auto Detect Setting of the Connected Device" is 0 and "Case of CPU STOP Setting" is 1: 0300
• When "Auto Detect Setting of the Connected Device" is 1 and "Case of CPU STOP Setting" is 0: 2100
• When "Auto Detect Setting of the Connected Device" is 1 and "Case of CPU STOP Setting" is 1: 2300
b15b14 b13b12 b10
0 0 0 to 0
Blank
[PLC Parameter]
Description
H
H
H
*1
and "Auto Detect Setting of the Connected Device"
b9 b8 b7 b0
1 0 to 0
Case of CPU STOP Setting
0: Refresh
1: Clear compulsorily.
Auto Detect Setting of the Connected Device
0: Not read the model name of the slave stations
1: Read the model name of the slave stations
"I/O Assignment" tab
*2
for a
H
H
H
H