Mitsubishi Electric MELSEC-Q Series User Manual page 136

(2) Device to be set in the refresh device setting
Whether remote output (RY) is refreshed or compulsorily cleared varies in the refresh device setting of the
network parameter as described below:
• When Y is set, remote output (RY) is compulsorily cleared regardless of the parameter setting.
• When a device other than Y, such as M and L, is selected, remote output (RY) is refreshed or compulsorily
cleared according to the setting.
(3) Setting method
Select whether to refresh or clear output (sending) data to a slave station in "Case of CPU STOP Setting" under
"Operation Setting" of the network parameter. (
134
When Y is selected, remote output (RY) is
compulsorily cleared regardless of parameter
setting.
Page 101, Section 7.3.2 (1), Page 118, Section 7.4.2 (1))