10.3.3
Settings for a local station
(1) Settings for a master/local module
Set the station number and transmission speed of the master/local module. (
(2) Parameter settings by using a programming tool
Connect a CPU module to a programming tool to set the parameters of the master/local module. (
Section 7.3)
1.
Create a project on a programming tool.
Select "QCPU (Q mode)" under "Series". Select "Q20UDH" under "Type".
[Project]
260
[New]
Page 21, CHAPTER 2)
Station No.1
Transmission speed 156kbps
Online
Page 96,