Table of Contents
Advertisement
Figure 3: SIERS control circuit
Hand-held remote control
(control pendant)
Hand-held remote control
(control pendant)
The hand-held control pendant includes
three illuminated LED pushbuttons, red
(CLOSE/CONNECT ), green (OPEN/
DISCONNECT), and white (TEST), plus an
amber LED used for alarm purposes.
The amber alarm LED illuminates to indicate
an alarm condition, such as a fault alarm
(obstruction, overcurrent or excessive time
elapsed when moving from one position in
the compartment to another).
Instruction manual
Note: The TEST pushbutton and LED are
disabled when the pendant is used with
SIERS in SIMOVAC or SIMOVAC-AR.
The standard hand-held control pendant
includes an extension cable 30 ft (9.1 m)
long that connects to a receptacle in the
low-voltage compartment of the controller
using a 9-pin connector.
| SIERS Siemens Integrated Electrical Racking System
7
Advertisement
Table of Contents
