Setting Items In Device Tag Setting - Mitsubishi Electric Melsec Q Series User Manual

7
MES INTERFACE FUNCTION CONFIGURATION TOOL

7.8.1 Setting items in Device Tag setting

Up to 64 items can be set in [Device tag settings] within one project.
Figure 7.30 [Device tag settings]
Table 7.37 Setting items in [Device tag settings]
Item
Device tag name Enter a device tag name. (Up to 16 characters)
Set whether to collect tag data at regular intervals or not.
Sampling settings When collecting, set a sampling interval.
Also, set whether to make the sampling more efficient or not.
Prohibit data writing Enable or disable writing data to the tag.
Set whether to use arrays for the tag or not.
Array setting
Configure the tag component settings.
Component setting input
Displays a list of the components that have been already set.
Component List
Make setting when changing the block size manually.
Array block size
No. of tag components in
Displays the number of all the tag components in the project.
project
No. of statistical Displays the number of the components in the project, for which [Perform
processings in project statistical processing] is selected.
No. of device points in tag Displays the number of total device points used in [Device Tag setting].
Description
Section 7.8.2 Setting items in Array setting
Section 7.8.3 Setting items in Component setting
Section 7.8.3 Setting items in Component setting
Section 7.8.3 Setting items in Component setting
7.8 Device Tag Setting
7.8.1 Setting items in Device Tag setting
1
2
3
4
5
6
7
8
7
- 39