Removing The Left Margin Slitter Position Motor - MyBinding DC-545HC Service Manual

(3) Removing the Left Margin Slitter
Position Motor
q
Remove the cover L unit from the DC-545.
w
Take out the 6 screws, and remove the lid.
e
Open the door in the stand, and remove the waste
tray.
r
Take out the 2 screws, and remove the cover.
t
Undo the thumb screws, and remove the guide unit.
y
Remove the connector for the motor. (1 position)
u
Take out the 4 screws, and remove the left margin
slitter position motor.
\See page 50
\See page 50
61
Chap.3
Guide Unit
Screws
Thumb
Screws
Screws
v Margin Slitter Section
Guide
Cover