Introduction - MyBinding DC-545HC Service Manual

The cause of most accidents is failure to adhere to basic safety rules and observe safety
instructions. It is important to prevent potential causes of accidents from occurring. In
order to do so, read this manual carefully, and be sure to understand all the safety instruc-
tions and correct inspection and servicing procedures that it provides before beginning
repair or servicing work.
Repairing or servicing the machine with insufficient knowledge about it could lead to
unforeseen accidents.
It is not possible to anticipate and describe in a manual such as this every possible
hazard that could arise in the course of repair and servicing. Therefore, besides observing
the safety instructions marked
personnel should be safety-conscious and take other safety precautions as necessary. When
performing repair or service work not covered by this manual, you should obtain safety
guidance from an appropriately knowledgeable person.

Introduction

in this manual and on the machine's labels, service
Copyright © 2003
DUPLO SEIKO CORPORATION
All Rights Reserved
1