Editing Format Knob List Using Command Line Interface - Quantum Data 802BT User Manual

Editing format knob list using command line interface

802BT/802R Video Test Generator User Guide
Use the following procedures to edit the format knob list and create new knob lists through
the command line interface.
To insert a format at a specific location in a format knob list:
1. Establish a terminal session with the generator.
2. Create a format and save it to the generator (see
63.)
3. Enter the following commands:
DIRL fmt
DIRB
NAMI 257 MyFormat
DIRE
DIRS
To remove a format from a specific location in the format knob list:
DIRL fmt
DIRB
NAMK MyFormat
DIRE
DIRS
To create a new format knob list, enter the following commands:
DIRL fmt
DIRB
NAMK format_1
.
.
.
NAMK format_x
NAMI 1 new_format_1
.
.
.
NAMI x new_format_x
DIRE
DIRA new_fmt
To apply a new format knob list:
FMTP new_fmt
"Creating custom
// loads default format list (fmt)
// begins a directory editing session
// inserts format named MyFormat at position 257
// ends the directory editing session
// saves contents of directory as current name
// loads default format list (fmt)
// begins a directory editing session
// deletes format named MyFormat
// ends the directory editing session
// saves contents of directory as current name
// loads default format list (fmt)
// begins a directory editing session
// deletes format_1
// deletes other formats
// deletes format_x
// inserts new_format_1 at location 1
// insert other formats
// inserts new_format_x at location x
// ends the directory editing session
// saves new format list as new_fmt
// loads format list new_fmt
formats" on page
69