Quantum Data 802BT User Manual page 431

LUTL
Class
Description
Command syntax
Query syntax
Query response
Other required
commands
Example
Video Test Generator User Guide
LUT Load
Lookup table memory management
Reads the lookup table having a name equal to name name from lookup table memory (or
EPROM) into the lookup table. LUTL does not re-configure the signal generating
hardware. This feature allows you to work on the contents of any lookup table memory
location, while continuing to output a signal based on a previously-used lookup table (see
LUTU command). The LUTL? query returns the location location in which a lookup table
having a name equal to name is found. If multiple lookup tables exist having name name,
then the lowest numbered location containing a lookup table with a matching name name
is returned. The lookup table memory (RAM) is always searched first. If a lookup table with
name name cannot be found anywhere in the lookup table memory, then the
industry-standard lookup tables located in EPROM (negative locations) are searched next.
LUTL? returns 0 if a lookup table with a name equal to name name cannot be found in
either lookup table space.
LUTL name
name
a valid MS-DOS filename (8 characters minus any extension)
LUTL? name
location (returns 0 if not found)
The LUTU command updates the hardware to the new settings.
LUTL my_lut // Load lookup table called my_lut
421