Image Errors - Quantum Data 802BT User Manual

2801
2802
2803
2804
2805
2806

3000-3999 Image errors

3000
3001
3002
3004
3005
722 Appendix C Error Messages
Pseudo-random noise sequence exceeds limit
The length of the pseudo-random noise sequence exeeds maximum value.
Pseudo-random noise type is not supported
The pseudo-random noise type is not supported.
No signal input to analyzer
There is no signal input to the receive interface of the analyzer.
X coordinate for delta patch out-of-range
The value specified for the X coordinate of the delta patch test is out-of-range.
Y coordinate for delta patch out-of-range
The value specified for the Y coordinate of the delta patch test is out-of-range.
Patch height must be greater than one
The patch height specified for a delta error test must be greater than one.
Invalid color name
The current firmware does not support a named color used by one or more primitives in
the user defined custom image
Invalid pattern name
The current firmware does not support a named fill patterns used by one or more
primitives in the user defined custom image
No image memory
There is not enough unused edit buffer memory space available to start a new custom
image editing session.
Invalid font name
The current firmware does not support a named font used by one or more primitives in the
user defined custom image
Image editor running
The current firmware does not allow a new custom image editing session to be started
while the current custom image editing session is still running.