Quantum Data 802BT User Manual page 730

2704
2705
2706
2714
2715
2716
2717
2719
2720
2721
720 Appendix C Error Messages
Invalid horizontal physical size
The video format's horizontal physical size value can not be negative.
Invalid physical size units
The current firmware does not support the type number used for the video format's units of
measure for physical size (USIZ setting).
Invalid vertical physical size
The video format's vertical physical size value can not be negative.
Pedestal swing out of range
The video format's blanking pedestal level (AVPS setting) can not be less that 0.0% of the
peak video level or more than 100.0% of the peak video level.
Gamma correction out of range
The current firmware does not support a video format's gamma correction factor (GAMA
setting) of less than 0.1 or greater than 10.
Analog video swing out of range
The generator hardware configuration does not support the video format's analog video
swing value (AVSS setting) for the given analog video type selection.
Sync swing out of range
The generator hardware configuration does not support the video format's analog video
composite sync swing value (ASSS setting) for the given analog video type selection.
Video swing calibration out of range
The generator hardware configuration does not support the current user defined analog
video swing calibration factors (AVSC settings) for one or more of the red, green or blue
channels. The valid factory default setting is 1.00 for all three channels.
Sync swing calibration out of range
The generator hardware configuration does not support the current user defined analog
video composite sync swing calibration factors (ASSC settings) for one or more of the red,
green or blue channels. The valid factory default setting is 1.00 for all three channels.
NTSC TV signals require blanking pedestal
The generator hardware configuration does not support producing NTSC TV video outputs
that do not use a blanking pedestal (AVPG setting of 0) as required by the NTSC
specifications.