System Errors - Quantum Data 802BT User Manual

10000-10999 System errors

10000
10010
10020
10025
10026
10030
10035
10100
10200
10205
732 Appendix C Error Messages
Out of memory
There is not enough unused battery backed user memory space to store the contents of
the given edit buffer
Invalid file check sum
The data object file that has been recalled from the generator's memory contains an
invalid checksum. Data may be corrupted.
Invalid file version
The data object file that has been recalled from memory contains a file version number
that does not match the current firmware. Data may not be properly interpreted by the
firmware
File type
The data object file that has been recalled from memory contains a file type identification
that is not supported by the current firmware.
File size
The size of the data object file that has been recalled from memory does not match the
size information stored in the file's header data.
Feature not implemented
The generator hardware configuration does not support one or more settings in the video
format
Video board not detected
An attempt was made to reprogram the firmware Flash EPROMs in a Model 822 series
generator without a video board installed. The video board's memory is used as a buffer
for the initial uploading of the firmware data.
Filename alias not found
An attempt was made to delete a filename alias that does not exist.
Font not overwriteable
An attempt was made to save the contents of a font editing buffer to a location in the
firmware EPROM.
Font save failed
There is not enough unused battery backed user memory space to store the contents of
the font editing buffer.