Quantum Data 802BT User Manual page 731

Video test generator
Hide thumbs Also See for 802BT:
Table of Contents

Advertisement

2722
2741
2742
2743
2745
2747
2748
2760
2761
2762
2800
802BT/802R Video Test Generator User Guide
Blanking pedestal out of range for NTSC TV signal
The generator hardware configuration does not support producing NTSC TV video outputs
that do not use a nominal blanking pedestal level (AVPS setting) of 7.5 IRE as required by
the NTSC specifications.
Digital video signal type not supported
The generator hardware configuration does not support any type of digital video outputs.
Invalid digital video signal type
The current firmware does not support the format's digital video type selection (DVST
setting).
Digital video polarity not positive
The generator hardware configuration and/or the firmware does not support digital video
formats having a logic low level for the active (lit) pixels.
Can not have analog AND digital video
The generator hardware configuration does not support the simultaneous generation of
analog and digital video signals.
Invalid analog video signal type
The current firmware for a given model generator does not support the video format's
analog video type selection.
Analog video signal type not supported
The generator hardware configuration does not support the video format's analog video
type selection.
Digital video not supported
The generator hardware configuration does not support the video format's digital video
type selection.
Digital video signal swing out of range
The value specified for the digital video signal swing is out of range.
Digital video swing calibration out of range
The value specified for the digital video swing calibration is out of range.
Pseudo-random noise seed value exceeds limit
The seed value for the pseudo-random noise analysis exceeds its maximum value.
721

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

802r

Table of Contents