Quantum Data 802BT User Manual page 502

PUTA
Class
Description
Command syntax
Other required
commands
492 Appendix A Command Reference
PUT Absolute
Direct processor control
Writes the specified value value into memory at the specified address address. The two
parameters address and value are interpreted according to the current setting of BASE
(see the BASE command). The number and format of the bits written depend on the
current setting of SIZE (see the
Note: This command is used only with custom applications and command files created by
Quantum Data. Indiscriminate use of this command can cause the generator to stop
operating and the loss of stored data in non-volatile RAM.
PUTA address value
address
0 to 4,294,967,295 unsigned decimal (BASE = 10)
-2,147,483,648 to 2,147,483,647 (BASE = -10)
0 to FFFFFFFF (BASE = 16)
-80000000 to 7FFFFFFF (BASE = -16)
value
0 to 2^(SIZE)-1
PUTA expects parameters formatted according to the current radix set by the
command.
SIZE command).
BASE