Table of Contents
Advertisement
170
Chapter 10 Testing EDID
To test the source device's handling of the EDID:
1. Connect the HDMI/DVI source device to the HDMI/DVI Rx connector on the generator.
Upon receiving the HDMI/DVI signal at the HDMI/DVI Rx connector, the generator
sends the EDID structure to the source device.
2. At the HDMI/DVI source device, compare the processed EDID information with the
EDID structure defined in the generator.
- Quick Links:
- Physical Controls
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 802BT and is the answer not in the manual?