Quantum Data 802BT User Manual page 726

2250
2270
2280
2300
2310
2320
2321
2330
2350
2370
716 Appendix C Error Messages
Vertical total too small for interlaced format
The total (active + blanked) number of horizontal scan lines per frame is less than the
minimum number supported by the generator hardware configuration.
Vertical total is even
The generator hardware configuration does not support interlaced scan video formats
having an even total (active + blanked) number of horizontal scan lines per frame.
Vertical total too large
The total (active + blanked) number of horizontal scan lines per frame exceeds the
maximum limit for the generator hardware configuration.
Vertical active too small
The active number of horizontal scan lines per frame of a progressive scan
(non-interlaced) video format is less than the minimum supported by the generator
hardware configuration.
Vertical blanking too small
The number of blanked horizontal scan lines per frame for a progressive scan
(non-interlaced) video format is less than the minimum supported by the generator
hardware configuration.
Vertical active too small for interlaced format
The active number of horizontal scan lines per frame of an interlaced video format is less
than the minimum supported by the generator hardware configuration.
Vertical active not even
The generator hardware configuration does not support interlaced scan video formats
having an odd active number of horizontal scan lines per frame.
Vertical blanking too small for interlaced format
The number of blanked horizontal scan lines per frame for an -interlaced video format is
less than the minimum supported by the generator hardware configuration.
Vertical pulse too small
The vertical sync pulse width is less than the minimum supported by the generator
hardware configuration.
Vertical pulse too large
The vertical sync pulse width is greater than the maximum supported by the generator
hardware configuration.