Quantum Data 802BT User Manual page 581

XACR
Class
Description
Command syntax
Related Commands
Video Test Generator User Guide
Audio Clock Recovery Data
Sonic data generator
Sets the N value, and optionally sets the CTS value.
The XACR command takes effect (the new N and CTS values are encoded and
transmitted to the receiver) after the packet is gated on (DPTG command) and the
hardware has been updated (DPGU command).
XACR n cts
n
value of audio clock regeneration
cts
Cycle Time Stamp. If not specified, the hardware will calculate the CTS value.
DPTG, DPGU
571