Quantum Data 802BT User Manual page 51

802BT/802R Video Test Generator User Guide
Test the display:
1. Using the Format knob, select the first test format.
2. Using the Image knob, select the first test image.
Note: You can customize your generator to run through a specified set of formats and
images automatically or manually by creating test sequences. See
sequence" on page 87 for details.
3. Repeat steps 1 and 2 for all formats and test images. Use the following guidelines to
verify proper operation:
• When testing photometry such as chrominence, use the ColorBar, SMPTE133, or
SMPTEbar images. Look for missing bars which may indicate a dead or
unconnected channel. Also, look at the transition between the bars; they should be
sharp and distinct. Each bar also should be uniform in color and intensity across its
entire width.
• To test luminance, you can use the
correction, you can use the
for verifying these parameters on the
B, "Image Reference."
• When testing for centering, use the Outline images. The detailed methods for
verifying centering with the Outline images
are provided in Appendix B,
• When testing resolution with the Grill images, you should be able to see individual
and distinct stripes in all areas of the display at all four resolutions.
• When testing for pixel anomalies, use the Flat, Raster, and Ramp images. Use the
Raster and Flat images to look for pixels that may be stuck On or Off, respectively.
The luminance should increase uniformly for the Ramp image. Also look for
sparkles indicating problems with sampling.
• When testing for persistence with the animated images
for bleeding or trails in the wake of the moving object.
SMPTE133 (grayscale) images. To test gamma
SMPTE133 (checkerbox) image. The detailed methods
SMPTE133 Image are provided in Appendix
(Outline0, Outline1, Outline2,
"Image Reference."
"Creating a test
Outline3)
(Cubes and Persist), look
41