Test Sequence Errors - Quantum Data 802BT User Manual

4000-4999 Test sequence errors

4000
4001
4002
4003
4004
4005
4006
4007
4008
4010
724 Appendix C Error Messages
Invalid format name
The test sequence contains one or more steps that have an invalid format name
parameter.
Invalid image name
The test sequence contains one or more steps that have an invalid image name
parameter.
No sequence memory
There is not enough unused edit buffer memory space available to start a new test
sequence editing session.
Sequence memory full
There is not enough free battery backed user storage memory to save the sequence that
is in the edit buffer.
Sequence not found
A test sequence of the given name could not be found in the user storage memory area.
Sequence editor running
The current firmware does not allow a new test sequence editing session to be started
while the current test sequence editing session is still running.
No sequence to save
An attempt was made to save the contents of a test sequence editing buffer when there
was no open test sequence editing session to save.
Sequence buffer full
No more steps can be added to the current sequence being edited because no more edit
buffer space is available.
Invalid delay setting in sequence
The test sequence contains one or more steps that have a negative number for the step
delay time.
Font index out of range
An attempt was made to use a font at an index location that is less than zero (0) or greater
than the highest index number in use.