RCTL
Class
Description
Command syntax
Example
Related commands
496
Appendix A Command Reference
Reset masked ConTroL bits
Format parameter setting - Digital video signal
Resets the masked control bits for the Broadcom or Silicon Image chip to low. The bits to
be reset are (one byte mapped as follows):
CTL13 CTL12 CTL11 CTL10 CTL03 CTL02 CTL01 CTL00
To reset a specific control bit, the mask must account for the current setting of the
remaining bits. See example below.
Note: CTL03 is not part of this resetting. It controls the HDCP.
RCTL mask
mask
hexidecimal
SCTL 23
// sets CTL00, CTL01, CTL11 to high
RCTL 22
// resets CTL00 bit to low (0)
SCTL