Quantum Data 802BT User Manual page 722

2075
2076
2077
2078
2079
2080
2082
2083
2084
2085
2090
712 Appendix C Error Messages
Analog composite sync type not supported
The video format's analog video composite sync type selection is not supported by the
generator hardware configuration.
Digital sync composite type not supported
The video format's digital composite sync type selection is not supported by the generator
hardware configuration.
Number of digital links not allowed
The number of serial digital video data links in the video format exceeds the number of
links supported by the current firmware.
Digital sync separate type not allowed for HDTV formats
The generator hardware configuration does not support digital separate sync for the
specific video type selection in the video format
Number of links not supported
The number of serial digital video data links in the video format exceeds the number of
links supported by the generator hardware configuration.
Pixel rate too low
The video format's total (active + blanked) number of pixel clock cycles per horizontal scan
line multiplied by the horizontal scan rate is less than the minimum pixel clock frequency
supported by the generator hardware configuration for the format video type.
Number of bits not allowed
The generator hardware configuration does not support the number of data bits per color
for the serial digital video type selected in the video format.
Invalid quantizing mode
An invalid value has been specified for the DVQM parameter.
Invalid Pixel Repetition
In digital mode, double clocking is not supported for this specific hardware. This error may
be the result of an older FPGA or hardware.
Invalid Sampling Mode
The value specified for DVSM is not valid and is inconsistent with the setting of DVST.
Horizontal total not even
The generator hardware configuration does not support interlaced video formats with a
total (active + blanked) number of pixel clock cycles per horizontal scan line that is not
evenly divisible by 2.