Testing Infoframes (Hdmi Only); Testing Hdmi Transmit Device Infoframe Capability - Quantum Data 802BT User Manual

Testing InfoFrames (HDMI only)

Testing HDMI transmit device InfoFrame capability

802BT/802R Video Test Generator User Guide
The HDMI analyzer can analyze InfoFrame data from an incoming HDMI signal. With this
capability, an HDMI transmit device can be tested for its ability to transmit InfoFrame
packets correctly.
The 802 generator can monitor the InfoFrame content of the received HDMI signal.
To view current HDMI InfoFrame contents received from an HDMI transmitter:
1. Connect an HDMIdisplay to the HDMI Tx connector on the generator.
2. Connect the HDMI source to the HDMI Rx connector on the generator.
3. Setup the generator for HDMI output (see page 147).
4. If desired, monitor the video signal received on the HDMI Rx connector (see
"Monitoring HDMI analyzer signal
5. Using the Format knob, select an appropriate format for the connected HDMI/DVI
display.
Note: To automatically configure the Format knob list based on the EDID structure of
a DDC-compliant display, hold down the R key, then press and release the ACS key.
input" on page 110).
127