Quantum Data 802BT User Manual page 729

Video test generator
Hide thumbs Also See for 802BT:
Table of Contents

Advertisement

2465
2466
2490
2495
2496
2550
2551
2553
2554
2555
802BT/802R Video Test Generator User Guide
Pixel clock pulse gate = 1 and pixel depth = 8
The generator hardware configuration does not support outputting a pixel clock output
when the video format's pixel depth is eight bits-per-pixel.
Pixel clock pulse gate = 1 not allowed
The generator hardware configuration does not support a pixel clock output.
EQ before too large
The video format's number of lines of pre-equalization for analog or digital composite sync
must not exceed the number of lines of vertical sync pulse delay.
EQ after too large for interlaced format
The interlaced video format's number of lines of post-equalization for analog or digital
composite sync must not exceed the number of scan lines from the end of the vertical
sync pulse to the start of video for either field.
EQ after too large
The non-interlaced video format's number of lines of post-equalization for analog or digital
composite sync must not exceed the number of scan lines from the end of the vertical
sync pulse to the start of video.
Not enough video memory
The generator hardware configuration does not have enough video memory to support the
video format's combination of active pixels per line (HRES setting) and active lines per
frame (VRES setting).
Insufficient memory
Not implemented at the time this document was created.
No PCMCIA card found in drive
When attempting to download a bitmap no PCMCIA card was detected in the generator's
PCM slot.
PCMCIA card is write-protected
When attempting to download a bitmap to a PCMCIA card, the PCM card was
write-protected.
PCMCIA card is bad
When attempting to download a bitmap to a PCMCIA card, the PCM card was found to be
bad.
719

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

802r

Table of Contents