Reading Data From The Start Up Screen; The Radeye Doesn't Show The Menu Items As Described In The Manual - Thermo Scientific RadEye PRD-ER Operating Instructions Manual

7.2

Reading data from the start up screen

The start up screen shows important data like the last calibra-
tion, the current voltage and the firmware version.
This screen stays active as long as the " " button is kept
pressed during the power on of the RadEye device.
7.3 The RadEye doesn't show the menu items as
described in the manual
The items available in the RadEye PRD's menu can be disa-
bled or enabled via the RadEye.EXE software. The factory
setting has all menu functions enabled. Please refer to chapter
6.4.5, menu settings. Next, please check the firmware version
of your RadEye PRD (see chapter 2.4) and compare your ver-
sion number with the revision table of this manual at the be-
ginning of the document. The revision table shows the intro-
duction of new functions together with the according firmware
version.
7-2 DB-066 E
Iw/Tr/Ff 06.07.2015
RadEye PRD-ER