Advertisement
Operation
Instrument Controls Menu
Analog Inputs
RS-232/RS-485 Selection
3-36
Model 48i Trace Level-Enhanced Instruction Manual
OTHER MEASUREMENTS:
>NONE
S/R
INT TEMP
BENCH TEMP
BENCH PRES
SAMPLE FLOW
INTENSITY
RANGE
AVG
MOTOR SPEED
BIAS SUPPLY
SCRUBBER EFF
The Analog Inputs screen allows the user to select the analog input signal
(none or analog inputs 1-8) that is tied to the selected streaming data item.
The selected item is shown by "<--" after it.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Streaming Data Config > Select Item > Analog Inputs.
ANALOG INPUTS:
>NONE
ANALOG IN 1
ANALOG IN 2
ANALOG IN 3
ANALOG IN 4
ANALOG IN 5
ANALOG IN 6
RANGE
AVG
ANALOG IN 7
ANALOG IN 8
The RS-232/RS-485 Selection screen allows the user to choose between the
RS-232 or RS-485 specification for serial communication.
Equipment Damage Disconnect the serial cable before changing RS-232
and RS-485 selection to prevent damage to the connected equipment.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > RS-232/RS-485 Selection.
DIAGS ALARM
DIAGS ALARM
▲
Thermo Fisher Scientific
Advertisement
Troubleshooting
